Support us on Patreon: https://www.patreon.com/woodshoplife
Guy’s Questions:
1) Hey guys, I hope all is well. When I was building my Roubo workbench I ran into a rust problem. I purchased kiln died lumber from a trusted source. I drilled a hole in some 4″ thick walnut for my tail vise end cap. I inserted my bench crafted screw to check the fit and left it for a few days. When I removed the screw it had rusted. Any thoughts on why this happened? Should I paint the section of the screw that will remain in the endcap? JD Messick
2) What do you guys think are the essential measuring tools that any woodworker should start out with; ie combination squares, rulers, etc. and any brand recommendations you might have. Any input is appreciated. -Travis
Sean’s Questions:
1) Gents, I’m torn at the moment as I am in the process outfitting my new 400sf stand-alone shop. Until recently, I’ve planned to install a 2 stage dust collection system with super dust deputy, externally venting fan and hard ducting with blast gates to each tool. I recently snagged up a used Festool domino ($675!) and ETC 125. I’m becoming a convert and seriously considering scrapping the dust collector plan and getting an Extractor to switch around as needed for each tool. What are your thoughts on going with 1 method over the other? I can’t afford both at the moment. Which extractor would you recommend? Is it feasible to hook a single extractor to all my other non-Festool equipment? I’m assuming that a little adapter would be needed for each. Other tools in the shop include a table saw, bandsaw, disc, and spindle sanders, planer, jointer, etc. Cheers! Clayton
2) I am planning to build a bookshelf for my son that will be around 5.5 feet tall, 3 feet wide and around 15 inches deep. I am planning to use plywood with a solid wood face frame and have two sturdiness questions. First, what thickness should I use for the plywood? I’ve been planning on 3/4 but am not sure if that is overkill/too heavy or if it’s what I should be using. Second, what are some suggestions for standing stability? It will be on carpet and I’m wondering if there are ways to stabilize it without attaching it to the wall. My son is one and grabs, pulls and climbs on everything so I want to make sure there is no way he can get it off balanced enough for it to come down. Thanks in advance for any suggestions and advice you have to offer!
Regards,
Alan Dills
Huy’s Questions:
1) Hey guys, loving the podcast and listening to the back catalog. Topic for Huy, can you elaborate on the benefits, ease of use, and justification with your scope of work and the cost of the pantorouter? Do you think this is a tool where you will find a way to use it on nearly every project? That thing looks awesome! Thanks! Nutone woodworker
2) What’s up guys, I’m hoping by the end of the summer to have a much bigger shop space. First purchase I would like to make is a Jointer. Looking at the Grizzly 8” w/ a helical head. Any opinions on that specific one would be great, also open to suggestions on others. But my main question is, does a jointer replace a planer? Besides a planer being self-feeding, what are the actual differences? Thanks, guys look forward to the show every other week
Tom
Our Instagram Picks:
Sean: @justin_dipalma
Guy: @garagewoodworks
Huy: @ericreason
