Category: Uncategorized

Guy’s Questions:

Good afternoon Gentlemen, Thank you for your podcast, I really appreciate it, and you fellows. Long story short, I am a re-engaging woodworker after taking a 20 year hiatus. Due to life requirements and work travel frequency, I was unable to keep up my hobby. I now have the time (and hopefully will NEVER have to fly somewhere for work again) to start anew. Things have changed quite a bit in past couple decades, and so have my interests in terms of wood working. Over my hiatus, I sold some of my equipment in hopes the machines would be used instead of sitting idle and it is time to re-equip my shop needs with eliminated tools and new needs. My tool requirements are also much different today, then they were 20 years ago. One requirement I now have is a drum sander. I don’t have the desire to rotate any work (key point), and want to acquire a machine that fits my specific needs, thus an 18″ capability is perfect for what my new woodworking interests require. I also refuse to take any advice from boob tube woodworkers recommendations, as it seems that 90% of the creators I find may have started out providing woodworking content, but they mostly all just become prejudiced tool reviewers who conflict each other based on who is giving them free tools or paying them. I have lost a lot of respect for some woodworkers on YouTube who used to be considered by me as inspirations in their early YouTube careers, no longer. With that said, I have trimmed my interest list down to a Jet 1836 and Supermax 19-38. I imagine some or all of you have had experience with both, and would like your feedback. I am not currently considering models with moving/height adjustable belts such as the shop fox/grizzly, however if you have anything to add on those, it would be nice to hear. Glad you have a new host, it seems like he may be a great fit for the podcast. Well wishes to all of you, and Guy, I hope your health is well.

Kurtis Van Kampen

You fellas have filled my head with hours and hours of information. You’re truly the best Podcast I’ve found. So before Guy’s head begins to swell, on with the question. I’ve started watching Nee Yankee workshop again now they I actually have a 520 sqft shop to work out in. In the first season Norm used what he called a panel cutting jig for the table saw. The fence of the jig was located on the blade side rather than the operator side like the modern crosscut sled. This jig is dead simple being made of only three boards. I had big plans to make a modern crosscut sled (not the aircraft carrier) with all the bells and whistles. Now I’m completely rethinking my next table saw jig. Since Guy (like myself) is the only one of you old enough to remember the first episode, this should probably be HIS question. Keep up the great work fellows. I appreciate what each of you bring to the table. -Bryan

Huy’s Questions:

I’d first like to say that I listen to a bunch of other woodworking podcasts as well, but of all of them, yours has the lowest level of useless off-topic banter. Keep up the good work. I have a question about the usage of my shop air cleaner. It’s a Jet AFS-1000B, and my ceiling is only 7’6”, so can’t hang it from there. So I have it on a roll-around cart. My shop is 13’ x 17’. I don’t have a central dust collection system, but for the following tools I hook up my shop vac to the tool: table saw, planer, drum sander, router table and random orbit sander. I also have a circular saw, a handheld router, a jigsaw, a drill press, a belt sander and a palm sander. My question is, for which tools should I be turning on the air cleaner, and on which setting? (it has low, medium and high settings) And how long should I keep it on for after the tool has been turned off? Thanks.
Steve

My perception is that the people who seem to get hurt the most are woodworking professionals who become too comfortable/familiar with machines. Is that a fair assessment? [I am a hobbyist woodworker.] FYI, on 3 I am just asking for a comment on my observation. Have a great day Chuck

Brians Questions:

First, love the podcast and thank you! Question: I’m building a 28 foot table. I’m thinking that I will essentially build 4 table tops and connect them with ‘double breadboards’ with runners between the tressels (5). Thoughts? Back story: I am a veteran and I run a program that addresses PTSD, Substance Abuse and homelessness in the the veteran community. An essential component is that the veterans cook meals and eat together and as the program has grown, there is an assortment of tables in the house and I want too big a build one. I am an average woodworker and I can do the basics. It doesn’t have to be piece of art, just chunky and uniform. Also, there’s not a big endless budget so I am doing what I can. The vision: I fhave to build it in my garage and put it together on site. 28 feet long, 38 inches wide (the space dictates it). The only way I can work out the jointing is a double breadboard end that joins each section. I thought about end jointing with dowels alternating the lengths of the boards so there was no single joint across the length of the board which was quite the puzzle to figure out. 5 trestles essentially spaced under the middle breadboards with 2 runners supporting the table between legs and one runner connecting the legs 1/3 up from the bottom of the leg. Craig laseur

Hi Guys, I love your podcast. I have listened to every single episode! Please keep them coming! I was listening to Episode 114 about the domino tips and I am now thinking of completing my kitchen cabinet project using dominoes instead of pocket screws for the cabinet construction as I already own a domino. I was curious as to how Brian prefers to assemble cabinets. I have already watched Guy’s videos! 😉 Do you use the domino? How do you go about end panel construction? How do you finish your cabinets? Any tips you can provide is greatly appreciated! Thanks, Natasha Round Lake, Ontario, Canada

Brian’s Questions:

Hey Guys! Love the podcast. Long time listener, first time asking a question! I am looking for recommendations on how to remove saw marks after ripping pieces to final width on the table saw. I recently built a couple rocking chairs for my kiddos, and was looking for a super smooth surface finish on all four sides. My solution was to joint and plane the parts on 3 sides and then rip a 1/32 or so oversized. After that I set my jointer to 1/32 and ran the cut edge back over the jointer to remove the saw. This m I recently scored a router table on Facebook marketplace for $500. Woodpecker PRL 1 lift, Incra jig ultra fence, and Porter Cable 3.25 horse router. 1, what’s your favorite lubricant for threaded parts like router lifts and table saw arbor tilts? 2, Other than keeping them clear of dust so they don’t over heat is there any other maintenance to extend the life of a router? They don’t make the Porter Cable routers anymore so I want to keep it in top condition. – Tylerethod seems to work nicely. I am using a Jet cabinet saw and not matter how much I try to adjust it, I can never seem to get a rip without at least a few saw marks. Just looking for ways to improve my efficiency while in the shop! Thanks again Dylan.

Hey guys, You said you needed more questions so here ya go… I have a couple hundred bucks left over from my December birthday and Christmas haul that I plan to spend on woodworking supplies/tools. I keep a running wish list throughout the year of various woodworking things I “need” So there is no shortage of things I could spend it on, however I don’t want to waste it. That has encouraged me to just sit on it for now and I feel like I’m at a bit of a crossroads. Do I simply save it and put it towards a big more expensive tool down the road (for example I don’t currently have any kind of planer or joiner). Or do I use it to buy some of the less sexy but more useful day to day items that every shop should have (i.e. better bits, blades, consumables, jigs, etc…) For reference: At this point in my woodworking career I do mostly hobbyist/DIY level work. I have either budget or second hand versions of most basic hand and power tools and the basic bigger tools (Benchtop Drill Press, Contractor Saw, Miter Saw) I would love to delve in to the more serious side of woodworking one day, so I do have a goal of getting a planer and joiner down the road. But realistically I know if one fell down from the heavens in to my shop tomorrow it wouldn’t get used immediately. Regardless of my own personal decisions I thought it would be cool to get y’alls take on what you would consider the top small ticket items that every shop should have. I think we all get more excited about big expensive tools, because frankly it’s more fun, but for people like myself just getting started on this journey it can be easy to miss the basics as a result of that excitement. Thanks for being so awesome, Jon

Guy’s Questions:

Good day fellas, Been listening for a while, and really enjoy the podcast. Here is my problem/question. For Christmas this past year I made a few cutting boards as gifts using Maple, Walnut and a few pieces of Purple Heart. In my design process I managed to make one of the cutting boards slightly too big to fit (on first glue up) through my Dewalt DW735 planer. In order to save some time, I just ran the piece through the table saw to get the over width down to just under 13″. On the first pass through the planer, everything went as planned. The second pass through didnt go so great. At around ¾ of the way through, the planer dug into the piece and put some pretty nasty snipe into the piece. Id say around 4-5″ from the end of the board, and almost 1/8″ deep. What would cause that to happen? Narrower pieces that ive ran through after havent given me any snipe since. Is it due to me using the entire 13″ of the cutter head? Because of my snipe issue, im really hesitant on running anything wide through the planer now. I want to experiment using some cheaper wood, but just havent found the time to do so yet. Thanks for the help. – Dwayne

Hey guys, heard you are in need of some questions from the last show, so thought I would send one your way. What do you think is the best paint for furniture that will see use and abuse? I’ve been experimenting with some different options and haven’t found anything that I think I will stick with, and I do not want to put a clear coat over the paint. Looking for something very hard and durable, as the next time I need it will be for chairs. Any suggestions would be much appreciated. Thanks!

Huy’s Questions:

When does something cross the line between being ‘handmade’ and ‘machine made’? My nephew had a CNC machine and advertised the products as ‘handmade.’ Is this all subjective anyways? Have a great day Chuck

Support us on Patreon: https://www.patreon.com/woodshoplife

Brians Questions: 

Hi Friends: I really enjoy every podcast you guys put out. Thanks to Brain for stepping up to be the third host. He seems to be a natural with podcasting and teaching woodworking techniques. My question is related to tool choice. I am currently planning to build out a router table into the black phenolic extension table for my sawstop PCS 175. I have the 36inch cut capacity. I have seen videos on modifiying the extension table and dropping in a router lift. It seems like a great shop space saver. I have two questions for you guys. Do you think there is any value in having a stand alone router table? or is modifying the phenolic table a reasonable approach. I plan to build a custom fence to attach to the sawstop fence. My second question is – how important is it to buy a full size (3.25hp) router versus just getting a mid size router (2.25hp)? I currently have the milwaukee battery powered palm router (1.25hp) which has been useful but I want the accuracy and stability of a router table. The bulk of my work is edging and dados, but I would like the capacity to do raised panel cabinet doors and even to take my router out of the table and eventually build a flattening jig for large slabs. Is 2.25hp enough for these tasks? I am a hobbyist and don’t have any production needs for this setup but don’t want to be limited. Accuracy is important to me so I am going to go with a lift rather than buying a router with a base that can be screwed onto a table (like the triton). One issue is that a lift + router setup for a 2.25hp router is about $350 and for 3.25hp, I’m looking at $800+. Thaks in advance for your thoughts Sincerely, Jeremy Los Angeles, CA

ey guys I just wrote in and submitted a question but I do have another which I hope can be answered I’m building a kitchen table, 36×60” with a 1.5” top. The table is being made out of Rustic Rift Sawn White Oak Question is what is the best or a best method to ensure the top stays flat. This is in San Diego, Ca so weather/ humidity changes are the quite mild. I was thinking maple cleats across the bottom/ not glued but screwed allowing for movement. Any suggestions would be great Thanks and can’t wait for the next episode Nicholas

Guy’s Questions:

1. What are the best responses to people who want you to make them something (usually for little or nothing)? [Most people are clueless regarding the effort and expense it takes to make something nice.] Have a great day Chuck

Hello all, the WoodMech here, I just purchased a ts55 festool tracksaw with the 55” guide rail for my kitchen remodeling project. I was wondering how accurate joining two tracks together compared to having the longer track? I was thinking about getting the guide rail with the shelf pin spacing holes and using that as the extension for cutting length wise on sheets of plywood. What are your thoughts or experiences? Thanks for the great show! Jeff Baran

Huy’s Questions:

Gentlemen and Guy 🙂 Have been listening for about a year and this is still the best woodworking podcast out there. I’d also like to thanks Sean for his contributions and welcome Brian to the show! My question is, there are so many woodworking content makers out there today. Who are the woodworkers that you guys follow ?? Second question… Assume you have become retired and now have lots of time on your hands. What woodworking projects would you work on? Would you go into production work and sell your goods, custom furniture??? What would be your ultimate retired woodworking project??? Thanks ! Liam Indianapolis, IN

So I’m having trouble with bubbles. Both when I’m using epoxy and fast drying/instant glue (Starbond) any advice on how to avoid them? I’m not doing large pours, this is simply some gap filling and knot hole stabilization. With the Starbond I do use their accelerator, but I’ve done it with and without, and it doesn’t seem to make a difference w/r/t the bubbles. Also, how do you get the glue/epoxy down into a pin hole? Mark Bett

Support us on Patreon: https://www.patreon.com/woodshoplife

Brians Questions:

Good evening everyone, Wanted to reach out to you about time in the shop. Im expecting my second child in a matter of days and was curious how you all find/found time in the shop with little kids running around and being constantly tired? My second question is a follow up regarding a question you all read regarding “Box Materials” on October 20th. Loved the double answer but was looking for Drawer box material to use. BB (or whatever you can find now) or a hardwood? Thanks, Paul at Twin Lake Woodshop

Hey guys love the podcast. I have been listening for a while now and hear you need some questions. What has been your favorite thing to build and why? something you’ve built in the past or even something you would like to build in the future. Please share how you built it (or want to build it) and what it was (or will be) enjoyable about the project. Thanks for all the great content and hopefully I’ll bring some more specific questions in the near future. -Nicholas

Guys Questions:

Long time listener, first time caller. You guys have mentioned water-based conversion varnish and that you can get it pigmented. I hate painting woodworking projects, but the wife wants what she wants. Why do you prefer conversion varnish and is there a certain product you prefer? I have a five stage Apollo sprayer, so spraying shouldn’t be a problem. I live on the southside of Indianapolis so it isn’t the easiest place to get supplies. Thanks, Geoff

Hi Fellas, I found the podcast a few months ago and have been really enjoying it. Thanks for the great content and knowledge. I am very much a novice woodworker so I have lots of questions. Sounds like you need questions and I would love some answers so maybe we can all come out on top here. Probably me more than you. Question #1 of 2. I have a little doweling jig, I think from Rockler. It gets the job done, but just barely. I would really like to upgrade to something that is more efficient but more importantly, that is more versatile. I want something with adjustable height and that can do acute angles. I would love a domino but its out of my price range right now. I saw that grizzly, triton and mafell all make a doweling joiner similar to a domino. Yes, one of these things is not like the other. The mafell looks incredible but it costs more than the domino. The triton and grizzly look fine and are very reasonably priced but the reviews tell me they probably aren’t worth spending the money. The dowelmax system looks great but its only does 90° and 45°, and you have to buy the 45° adapter plate. After all that, I may as well save a little longer and get the domino. My questions is: should I risk it with the triton, get a biscuit joiner (which I’m worried won’t have enough strength for certain applications) or just keep saving and get a domino down the road? Or is there another product I don’t know about? Thanks. Happy New Year! Jon Moch

Huy’s Questions:

I have been given a mission to make a wooden serving dish. The shape is basically an elongated oval. Dimensions are 21″ x 9″ x 1 1/2″. My patron (hum hum) called the design a fish platter. Wood will probably be walnut. The walls of the dish are to be sloped and just slightly curved. With some hand work I think I can achieve the outside wall of the dish. The issue creating the most questions for me is how to do the inside wall of the dish. I have seen plenty of bowl and tray bottom router bits. All cut a vertical wall. Bevel router bits I have seen have a bearing on the bottom. The bearing would interfere with the bottom of the dish. Because of the inside and outside curve of the wall I doubt if making a custom scratch stock would yield good results. I don’t want to get into the CNC rabbit hole. Any thoughts? You have a great podcast and provide a valuable service to the wood working community. Cheers, Bob

On one of the kitchen tables that I made I used mortise-and-tenon joinery, which turned out well, with everything plumb, and then to make sure it was strong I also put in a corner brace cut at 45-degrees, screwed into the skirt on each side, and then ran a cabinet screw through that corner brace into the leg. I left a small gap, about 1/16″ between the corner brace and the leg. When I tightened up the braces the legs splayed out a little bit, making them not quite plumb. My concern with seeing the leg move is that I may have stressed the tenons (although I didn’t hear any cracking). Is the best practice to omit this corner bracing when doing mortise-and-tenon tables? Mark Schmidt

Guys Questions:

Hey guys. I just finished listening to your latest podcast, really good information and insight as usual. I’m still a novice user of the Domino so really enjoyed the tips and tricks you provided in answering a Domino related question. You mentioned being very short on questions so I’m going to send a similar question to one sent a couple of months ago that didn’t get answered. I built an outfeed table a couple of years ago to use solely as an extension of my table saw. Now I find that I use it for glue-ups, as an assembly table and just about every other task. The table is roughly 44″ x 44″. I would now like to rebuild it as a true multi-functional table with the proper hold-downs and clamping devices and could use some design advice from you based upon the pros and cons you find with your own MFT’s. One particular area I’m interesting in is the size of dog holes to use (imperial vs metric) and some recommendations on the type of dogs and clamping devices I should buy to get the best use of the MFT. Thanks again for having by far the best woodworking podcast available. And Brian, welcome to the team. Jack Francis Geneva, IL

Happy New Year Guys, and welcome Brian. Guy and Huy have been kind enough to answer a number of my questions in the past (and Huy has always been helpful in making me spend money lol). With my last question you helped me convince myself to invest in a CNC which is on order now, and after watching Guy’s video on his 3D Printer (and he was kind enough to answer a question on the video for me) I was wondering if you three would expand on your thoughts on CNC, 3-D printing, and Lasers in the wood shop for the hobbyist woodworking. I foresee having all three in my arsenal at some point in the near future. Thanks as always and I look forward to your insights, Doug

Brians Questions:

Fellow travelers on this path of wood- First off, there has to be a better way of saying that. Secondly, I don’t think I have told you recently how much I am enjoying the podcast, and your new addition Brian. At first I was like “two hosts from Indiana and I don’t even believe that state actually exists,” but you’ve won me over. On to my question. I find myself wanting maple doors for my house, but I need…13 to start for the upstairs. And I want them to be curly maple. So, because I got into woodworking to save money (duh), I’m going to build them myself. 4-panel Shaker style interior doors ranging from 24″ to 36″ wide. Would you recommend using maple ply for the panels, or glueing up stock? Honestly my concern isn’t so much wood movement as the P.I.T.A. it would be to make all those panels (Pain in the…). And while we are on the subject of pains in the posterior, would you recommend a Domino or Lamello, save me a few minutes on those mortice and tenons, or just jig it up? Unfortunately I think the hand tools have to sit on the sidelines for this one. Thank you for your sage advice. Excelsior! – Tom Figura

Hi Guy, Huy, and Brian, Thank you for the very informative podcast, I’ve been listening for years. The knowledge that I’ve gained from the Woodshop Life podcast helps me make my limited time in the shop way more efficient. Thank you for generously sharing your wisdom. Question for you guys about sheet good selection. What sheet goods do you typically use for the projects in your shop and what is your thought process when deciding if if a particular project should use Baltic Birch, common 7 layer plywood, MDF, etc.? Baltic Birch is the premium grade option, but do you use it for projects such as shop cabinets, sleds, and fixtures? Thank you, Dominic Santa Cruz, CA

Huy’s Questions:

Hello. My question is regarding the placement of a dust collector. I have a 250 SF shop so every SF is precious. I am a hobbyist woodworker/DIYer. My current dust collection is a shop-vac with a dust-stopper bucket separator in a cart. 1 hose, all my tools and multiple converters to fit each tool. The cart doubles as an outfeed table for the table saw. I have an open rafter ceiling with a storage floor in it (currently filled with crap I should get rid of). I am considering a more powerful collector and ducting to 2 machines (miter and table saw) and to a boom arm that can be used for miscellaneous tools (skill saw, drill press etc.). I’m looking at the Jet DC-650MK or something similar (1 -2 HP, $600 – $800ish ranges. So finally, my question: Could a system like this be mounted in that attic storage above the shop and function correctly? Any obvious issues I’d run into? I have simple pully system for getting the full bag from there to the main floor. A couple of concerns are performance issues based on the elevated height, safety (I don’t really have any concerns, but this is totally a “I don’t know what I don’t know” situation) and???? I love the podcast guys. I binged all of your episodes during the height of the pandemic (summer of 2020) and just loved it. I took a break for more than a year but I’m back, and I’m so glad you’re still here! Best regards, Michael

Hey Guys. Ive been woodworking for a couple years now and really enjoy the show to learn the fundamentals. I’m currently planning a walnut tv stand build and have a question about box bottoms. The piece will have two support legs (one on either side), a low shelf and a 8 inch deep box on the top spanning the 48 inch width between the legs. The box on the top will have a lid opening from the top similar to a blanket chest and be used to hold exercise dumbbells which collectively weight about 200 lbs. my question is… how should I make the box bottom so that it can support so much weight without any extra supports across the 48 inch span? Hardwood? plywood? Dado a groove for the bottom? From what I can tell online, it might make the most sense to use 3/4 ply and a 3/4 dado however my understand is that the recess below the dado should be the same width as the ply which will leave a 3/4 deep recess under the box that might be noticeable since it’s floating above the lower shelf. Also in a 8 inch tall box, I will be losing precious storage space quickly. I was thinking about cutting a rabbet in the ply to insert only a 1/2 inch in the groove and fill some of the recess under the box bottom but I’m not sure about strength. Maybe I could get away with just 1/2 inch ply in that case? The carcass of the rest of box will be made of solid walnut. I hope that all made sense. Thanks a lot for your thoughts. -Tyler