Support us on Patreon: https://www.patreon.com/woodshoplife
Guys Questions:
1) What’s your least favorite wood species to work with and why? Eric
2) Thank you for all the great content and for coming together to create this podcast. I’ve learned a lot from all three of you over the last few years. Here’s my question:
I live near the coast in North Florida which is a very warm and humid climate. Huy, I know you live in Alabama, so maybe you can relate to this. My shop is climate controlled in that it has central A/C, but it’s an old building and the humidity level varies greatly throughout the year. I don’t have local access to a lot of hardwood lumber, but what I can get is typically kiln dried and stored in non climate controlled environments before I get my hands on it. It seems like invariably the lumber I get warps in some way, almost regardless of how long I let it sit before milling it and the moves again after I mill it. I know this is common, but I think the amount of movement I’m seeing is not what you’d see in a climate with more moderate humidity, but maybe I’m wrong. The exception to this is a batch of air dried cherry that I picked up from someone that had been drying for about 20 years. Given that I don’t want to wait 20 years before starting each project, is there anything I can do to reduce the amount of movement I’m seeing in my lumber and can you talk a little bit about techniques you might employ if the wood does move so that it’s not just all wasted. For example; alternating cups and bows when gluing a panel together so that they kind of cancel each other out.
Thanks again for your willingness to share your experiences with the community.
Dave
Seans Questions:
1) Seeing other woodworkers invest into the community is awesome, I appreciate that you guys are doing your part to keep our craft alive.
I have a question for you guys.
I have found in many cases its easier to break out a hand tool, than to set up an operation using power tools. In what cases will you choose a hand tool over a power tool, and why? Would love to hear your thoughts on this.
regards,
Mike Miller
MillerWoodcraft
2) My wife and I recently bought our first house and are looking to freshen up the kitchen. Looking to do a painted finish but I am trying to weigh the pros and cons of refinishing what we have or purchasing new cabinets. The current cabinets are solid oak boxes with MDF doors with veneered front, original to the house. Originally I was going to build new shaker style doors and then paint everything to match. However, after doing some test doors on the router table with tongue and groove bit, I am not feeling so confident(novice woodworker) with that and also the amount of work involved to remove the finish and repaint all the boxes as well. Given all that, it seems easier or more cost and time effective to buy new cabinets that I can finish myself or possibly pre-finished in the color we want. Any insight or advice you guys could provide would be very beneficial. Thank you in advance and absolutely love the podcast! Andy
Huys Questions:
1) Question – I have a Delta 28-243 14″ bandsaw with a riser block kit that I’ve been slowly upgrading. I’ve put new wheel bearings and urethane tires on. Next step I’m thinking about is ordering the Carter wheel guides instead of using cooling blocks. They are spendy, so do you think it’s worth the upgrade? Thanks, love the show!
-Larry
2) Hey gents, love the podcast here is a question/show topic for you. What are your top 5 productivity techniques when building furniture? I’m sure there a ton of juicy nuggets in there that can help a ton of people including myself. I’m running a furniture business on the side and I’m trying to get faster while increasing/maintaining my quality. Thanks guys, Brad
Our Social Picks:
Sean YouTube pick: Thomas Johnson Antique Furniture Restoration
Huy: @willowswoodworks
Guy: @tektonguild
